How to wash the store floor with an auto scrubber
A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Store floor (porcelain, terrazzo, vinyl, finished floor).
What you'll need
- Product (by type): Low-foam detergent for auto scrubbers; Neutral floor cleaner (daily maintenance); Neutral detergent for finished floors (porcelain, treated floors)
- Reference dilution: Low-foam detergent for auto scrubbers: pH 9.5–11.3; from 1:40 (check the range on the label); Neutral floor cleaner: pH 6–8; up to 1:100; Neutral detergent for finished floors: pH 6.5–8.5; up to 1:400. Always check the label of the product you use.
- Equipment: Auto scrubber; red pad (daily cleaning) or brush; dust mop; broom and dustpan; long-handled scraper; measuring container; holder with pad; wringer bucket and wet mop; cleaning cart; signs; trash bag
- Protection (PPE): Gloves; safety boots; uniform. Area protection: warning signs
Step by step

- Dust-mop the whole area (see: how to keep the store floor clean during opening hours).
- Check that the machine's pad and squeegee are clean.
- Fit the right pad for the floor (red for daily cleaning).
- Fill the tank with clean water.
- Measure the detergent with a measuring container according to the tank volume.
- If needed, add antifoam to the recovery tank.
- Scrub in straight lines, overlapping the previous pass by 2 to 4 cm.
- Check that the whole area has been scrubbed and vacuumed.
- Clean corners and under gondolas with the holder and pad.
- Dry leftover solution with a wrung-out wet mop.
- Empty and rinse the machine's tanks.
- Clean the squeegee and leave it raised; wash the pad.
The balance of this job (Sinner's Circle)
Every clean combines chemistry, mechanical action, temperature and time. Here's how much each one counts in this task — learn the method.
Safety tips and common mistakes
Frequently asked questions
What product should I use to wash the store floor with an auto scrubber?
Low-foam detergent for auto scrubbers; Neutral floor cleaner (daily maintenance); Neutral detergent for finished floors (porcelain, treated floors). Reference dilution: Low-foam detergent for auto scrubbers: pH 9.5–11.3; from 1:40 (check the range on the label); Neutral floor cleaner: pH 6–8; up to 1:100; Neutral detergent for finished floors: pH 6.5–8.5; up to 1:400. Always check the label of the product you use.
How long should the product sit?
Action during the pass.
What protective equipment (PPE) should I wear?
Gloves; safety boots; uniform. Area protection: warning signs.
What equipment and supplies do I need?
Auto scrubber; red pad (daily cleaning) or brush; dust mop; broom and dustpan; long-handled scraper; measuring container; holder with pad; wringer bucket and wet mop; cleaning cart; signs; trash bag.
What precautions and common mistakes should I know about?
Never add more detergent than specified — it leaves the floor sticky. Always store the machine with the squeegee raised so the rubber doesn't warp.
What if I don't have everything?
Too much foam in the recovery tank: add antifoam to the dirty tank, never less water. Corners and under gondolas: use the holder and pad, since the machine can't reach.
How long does it take to wash the store floor with an auto scrubber?
1 min per 30 to 50 m² (estimated, depends on the machine).
When should I call a professional?
Large areas without a scrubber, or floors that need stripping and refinishing.
Technical content written by MiLimpa based on professional cleaning methods (Supermarket cleaning video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use.