How to sanitize equipment that can't get wet
A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Slicer, cutter, scale, wrapper, vacuum sealer, oven exteriors.
What you'll need
- Product (by type): Hydrogen-peroxide disinfectant multi-purpose cleaner; Alkaline disinfectant degreaser with quaternary ammonium; Disinfectant wipe (hydrogen peroxide)
- Reference dilution: Hydrogen-peroxide disinfectant multi-purpose cleaner: pH 2.2–3.5; general cleaning up to 1:200; disinfection up to 1:50; Alkaline disinfectant degreaser with quaternary ammonium: pH 12–14; light soil 1:100, medium 1:40, disinfection up to 1:20; Disinfectant wipe: ready-to-use wipe. Always check the label of the product you use.
- Equipment: Hand sprayer; disposable or microfiber cloth; non-abrasive pad; hand brushes
- Protection (PPE): Gloves; cut-resistant glove for blades; apron; hair net
Step by step

- Unplug the equipment.
- Spray the solution onto the cloth, never directly onto the equipment.
- Wipe the whole surface in one direction.
- Where dirt is stuck on, spray the pad and scrub.
- Use a hand brush in gaps and details.
- Remove excess product with a clean disposable cloth.
The balance of this job (Sinner's Circle)
Every clean combines chemistry, mechanical action, temperature and time. Here's how much each one counts in this task — learn the method.
Safety tips and common mistakes
Frequently asked questions
What product should I use to sanitize equipment that can't get wet?
Hydrogen-peroxide disinfectant multi-purpose cleaner; Alkaline disinfectant degreaser with quaternary ammonium; Disinfectant wipe (hydrogen peroxide). Reference dilution: Hydrogen-peroxide disinfectant multi-purpose cleaner: pH 2.2–3.5; general cleaning up to 1:200; disinfection up to 1:50; Alkaline disinfectant degreaser with quaternary ammonium: pH 12–14; light soil 1:100, medium 1:40, disinfection up to 1:20; Disinfectant wipe: ready-to-use wipe. Always check the label of the product you use.
How long should the product sit?
The label contact time for disinfection.
What protective equipment (PPE) should I wear?
Gloves; cut-resistant glove for blades; apron; hair net.
What equipment and supplies do I need?
Hand sprayer; disposable or microfiber cloth; non-abrasive pad; hand brushes.
What precautions and common mistakes should I know about?
Never throw water or spray product directly onto electrical equipment. Always wear a cut-resistant glove near blades.
What if I don't have everything?
Stuck-on dirt: spray the product onto the non-abrasive pad instead of raising the dose. No sprayer: use a ready-made disinfectant wipe.
How long does it take to sanitize equipment that can't get wet?
5 to 10 min per machine.
When should I call a professional?
Dirt inside the motor or housing.
Technical content written by MiLimpa based on professional cleaning methods (Supermarket cleaning video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use.