How to sanitize a checkout: belt, scale and counter

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Belt, scale, counter and checkout touch points.

Quick answer: To sanitize a checkout: belt, scale and counter, use hydrogen-peroxide disinfectant multi-purpose cleaner; main steps: make sure the belt and scale are empty; spray the solution onto the cloth (or the pad, if dirt is stuck on); wipe the whole surface in one direction; leave the belt running and clean it as it turns, until a full loop is done.
AreaSupermarket — checkouts
ContaminationModerate
Dwell timelabel contact time
DifficultyEasy
Estimated time3 to 5 min per checkout

What you'll need

  • Product (by type): Hydrogen-peroxide disinfectant multi-purpose cleaner
  • Reference dilution: Hydrogen-peroxide disinfectant multi-purpose cleaner: pH 2.2–3.5; general cleaning up to 1:200; disinfection up to 1:50. Always check the label of the product you use.
  • Equipment: Hand sprayer; disposable cloth; non-abrasive pad
  • Protection (PPE): Gloves

Step by step

How to sanitize a checkout: belt, scale and counter: The numbers in the picture match the steps below.
The numbers in the picture match the steps below.
  1. Make sure the belt and scale are empty.
  2. Spray the solution onto the cloth (or the pad, if dirt is stuck on).
  3. Wipe the whole surface in one direction.
  4. Leave the belt running and clean it as it turns, until a full loop is done.
  5. Remove the excess with a clean disposable cloth.
  6. Wash the pad and sprayer and put them away.

The balance of this job (Sinner's Circle)

Every clean combines chemistry, mechanical action, temperature and time. Here's how much each one counts in this task — learn the method.

ChemistryMedium — disinfectant multi-purpose cleaner on the cloth or pad
Mechanical actionLow to medium — cloth; non-abrasive pad where stuck
TemperatureLow
TimeMedium — label contact time
Missing something? Here's how to compensate: No stuck-on dirt: just the cloth with solution. Stuck-on dirt: spray the non-abrasive pad instead of using more product.

Safety tips and common mistakes

Never wipe in circles or back and forth. Never spray directly onto the scale or the barcode scanner.
When to call a professional: Dirt under the belt (technical disassembly).

Frequently asked questions

What product should I use to sanitize a checkout: belt, scale and counter?

Hydrogen-peroxide disinfectant multi-purpose cleaner. Reference dilution: Hydrogen-peroxide disinfectant multi-purpose cleaner: pH 2.2–3.5; general cleaning up to 1:200; disinfection up to 1:50. Always check the label of the product you use.

How long should the product sit?

Label contact time.

What protective equipment (PPE) should I wear?

Gloves.

What equipment and supplies do I need?

Hand sprayer; disposable cloth; non-abrasive pad.

What precautions and common mistakes should I know about?

Never wipe in circles or back and forth. Never spray directly onto the scale or the barcode scanner.

What if I don't have everything?

No stuck-on dirt: just the cloth with solution. Stuck-on dirt: spray the non-abrasive pad instead of using more product.

How long does it take to sanitize a checkout: belt, scale and counter?

3 to 5 min per checkout.

When should I call a professional?

Dirt under the belt (technical disassembly).

Technical content written by MiLimpa based on professional cleaning methods (Supermarket cleaning video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use.