How to bleach cutting boards and tables (deep clean)

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Polyethylene cutting boards and tables.

Quick answer: To bleach cutting boards and tables (deep clean), use chlorinated alkaline disinfectant detergent (foam application); Chlorinated disinfectant for food-contact surfaces; main steps: if the board is heavily scored, scrape it level; wash the board or table first; apply the chlorine solution over the whole surface; cover with paper or a disposable cloth.
AreaButcher, fish counter, deli, kitchen
ContaminationHigh
Dwell timeat least 2 hours, or overnight
DifficultyMedium
Estimated time10 min of work per board + 2 to 12 h of dwell

What you'll need

  • Product (by type): Chlorinated alkaline disinfectant detergent (foam application); Chlorinated disinfectant for food-contact surfaces
  • Reference dilution: Chlorinated alkaline disinfectant detergent: pH 12–14; disinfection up to 1:50; degreasing up to 1:100; Chlorinated disinfectant for food-contact surfaces: pH 12–14; up to 1:400. Always check the label of the product you use.
  • Equipment: Foam generator or container; paper or disposable cloth; board scraper; counter squeegee
  • Protection (PPE): Waterproof apron; gloves; safety boots; hair net; uniform

Step by step

How to bleach cutting boards and tables (deep clean): The numbers in the picture match the steps below.
The numbers in the picture match the steps below.
  1. If the board is heavily scored, scrape it level.
  2. Wash the board or table first (see: how to foam-clean ceilings, walls and counters; see: how to sanitize cutting boards).
  3. Apply the chlorine solution over the whole surface.
  4. Cover with paper or a disposable cloth.
  5. Wet the paper with the solution again.
  6. Let it work for at least 2 hours, or overnight.
  7. Remove the paper and the excess with the squeegee.
  8. Rinse with clean water.
  9. Dry with a counter squeegee.

The balance of this job (Sinner's Circle)

Every clean combines chemistry, mechanical action, temperature and time. Here's how much each one counts in this task — learn the method.

ChemistryMedium — chlorine at the label dilution
Mechanical actionLow — the paper cover holds the product in place; scrape only to level
TemperatureLow — room temperature
TimeHigh — at least 2 hours, or overnight
Missing something? Here's how to compensate: Very old stains: give it more time (overnight), never a stronger dose. Deeply grooved boards: scrape them level before bleaching.

Safety tips and common mistakes

Never use chlorine on wooden boards or together with acids. Always rinse well before cutting food again.
When to call a professional: Boards with deep grooves (replace or resurface).

Frequently asked questions

What product should I use to bleach cutting boards and tables (deep clean)?

Chlorinated alkaline disinfectant detergent (foam application); Chlorinated disinfectant for food-contact surfaces. Reference dilution: Chlorinated alkaline disinfectant detergent: pH 12–14; disinfection up to 1:50; degreasing up to 1:100; Chlorinated disinfectant for food-contact surfaces: pH 12–14; up to 1:400. Always check the label of the product you use.

How long should the product sit?

At least 2 hours, or overnight.

What protective equipment (PPE) should I wear?

Waterproof apron; gloves; safety boots; hair net; uniform.

What equipment and supplies do I need?

Foam generator or container; paper or disposable cloth; board scraper; counter squeegee.

What precautions and common mistakes should I know about?

Never use chlorine on wooden boards or together with acids. Always rinse well before cutting food again.

What if I don't have everything?

Very old stains: give it more time (overnight), never a stronger dose. Deeply grooved boards: scrape them level before bleaching.

How long does it take to bleach cutting boards and tables (deep clean)?

10 min of work per board + 2 to 12 h of dwell.

When should I call a professional?

Boards with deep grooves (replace or resurface).

Technical content written by MiLimpa based on professional cleaning methods (Supermarket cleaning video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use.