How to restore scratched or stained brushed stainless steel
A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Brushed stainless steel sinks, hoods, elevator panels, water features and countertops.
What you'll need
- Product (by type): Metal polish cream; Protective metal sealant; Neutral detergent
- Reference dilution: Ready to use. Always check the label of the product you use.
- Equipment: New green pad (brushed stainless only); white pad; microfibers; masking tape; key to remove the drain
- Protection (PPE): Gloves
Step by step

- Wash with neutral detergent and dry: grit on the surface turns into scratches.
- Remove or mask the parts that aren't brushed (chrome drain, polished pieces).
- Look for the direction of the fine factory lines: that is the grain.
- To erase scratches, run the new green pad only along the grain, with even pressure, end to end.
- Wipe off the dust with damp microfiber.
- Apply metal polish with a white pad or microfiber, always in the same direction, to even out the shine.
- Remove the excess with clean microfiber.
- Protect with metal sealant, spreading it along the grain.
The balance of this job (Sinner's Circle)
Every clean combines chemistry, mechanical action, temperature and time. Here's how much each one counts in this task — learn the method.
Safety tips and common mistakes
Frequently asked questions
What product should I use to restore scratched or stained brushed stainless steel?
Metal polish cream; Protective metal sealant; Neutral detergent. Reference dilution: Ready to use. Always check the label of the product you use.
How long should the product sit?
A few minutes per area.
What protective equipment (PPE) should I wear?
Gloves.
What equipment and supplies do I need?
New green pad (brushed stainless only); white pad; microfibers; masking tape; key to remove the drain.
What precautions and common mistakes should I know about?
The green pad is used here only because brushed stainless is made of parallel lines already; across the grain or in circles it ruins the piece. Never use a green pad on glass, chrome or mirror-finish stainless.
What if I don't have everything?
Only stains, no scratches: skip the green pad and use just polish and sealant. Large piece: work in full-length strips so the finish has no seams.
How long does it take to restore scratched or stained brushed stainless steel?
30 to 60 min per sink.
When should I call a professional?
Deep scratches, dents or mirror-finish stainless.
Technical content written by MiLimpa based on professional cleaning methods (Glass and shower restoration video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use.