How to dry-clean lobby and reception floors

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Large hard-floor areas.

Quick answer: To dry-clean lobby and reception floors, main steps: run the dust mop in a sideways 'S', walking backwards and moving the dirt toward the dustpan and cart; pick it up with the dustpan and mini broom and throw it in the cart's bag; to remove a full bag from the cart: tie two knots without taking it out, open the zipper and remove it through the opening.
AreaCommon areas
ContaminationLow
Dwell time—

What you'll need

  • Equipment: Dust mop, dustpan, mini broom, cleaning cart
  • Protection (PPE): —

Step by step

How to dry-clean lobby and reception floors: The numbers in the picture match the steps below.
The numbers in the picture match the steps below.
  1. Run the dust mop in a sideways 'S', walking backwards and moving the dirt toward the dustpan and cart.
  2. Pick it up with the dustpan and mini broom and throw it in the cart's bag.
  3. To remove a full bag from the cart: tie two knots without taking it out, open the zipper and remove it through the opening.
Why it works: Dry before wet; sideways 'S'. See the method.

Safety tips and common mistakes

A bag dragged or pulled out over the top will tear.

Frequently asked questions

What product should I use to dry-clean lobby and reception floors?

No chemicals: this is a dry clean.

How long should the product sit?

—.

What protective equipment (PPE) should I wear?

—.

What equipment and supplies do I need?

Dust mop, dustpan, mini broom, cleaning cart.

What precautions and common mistakes should I know about?

A bag dragged or pulled out over the top will tear.

Technical content written by MiLimpa based on professional cleaning methods (Hospitality cleaning manual). Initial version, under technical review. Always follow the label and safety data sheet of the product you use.