Cleaning and sanitizing transfer pumps and hoses

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Transfer pumps and lines.

Quick answer: To cleaning and sanitizing transfer pumps and hoses, use deionized water + sanitizer; main steps: fill a drum with deionized water (amount set by validation); put one end of the hose in that drum and the other in an empty drum; run the pump to flush; clean the outside of the pump and hose.
AreaCosmetics industry
ContaminationCritical (product)
Dwell timeManufacturer's time

What you'll need

  • Product (by type): Deionized water + sanitizer
  • Reference dilution: As validated. Always check the label of the product you use.
  • Equipment: Drums, plastic film
  • Protection (PPE): Gloves, goggles, apron

Step by step

Cleaning and sanitizing transfer pumps and hoses: The numbers in the picture match the steps below.
The numbers in the picture match the steps below.
  1. Fill a drum with deionized water (amount set by validation).
  2. Put one end of the hose in that drum and the other in an empty drum.
  3. Run the pump to flush.
  4. Clean the outside of the pump and hose.
  5. Repeat with a drum of sanitizer solution and leave it in contact for the specified time.
  6. Flush out the sanitizer by pumping deionized water.
  7. If it won't be used soon, seal the ends with plastic film.
  8. Fill in the log tag.
Why it works: Cleaning validation; record keeping. See the method.

Safety tips and common mistakes

Do this at every raw-material transfer or as validated.

Frequently asked questions

What product should I use to cleaning and sanitizing transfer pumps and hoses?

Deionized water + sanitizer. Reference dilution: As validated. Always check the label of the product you use.

How long should the product sit?

Manufacturer's time.

What protective equipment (PPE) should I wear?

Gloves, goggles, apron.

What equipment and supplies do I need?

Drums, plastic film.

What precautions and common mistakes should I know about?

Do this at every raw-material transfer or as validated.

Technical content written by MiLimpa based on professional cleaning methods (Cosmetics industry hygiene and cleaning manual). Initial version, under technical review. Always follow the label and safety data sheet of the product you use.