Cleaning and sanitizing raw-material tanks
A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Raw-material tanks.
What you'll need
- Product (by type): Water; solvent (ethyl alcohol) if the residue is not water-soluble; 70% alcohol (sanitizing)
- Reference dilution: As validated. Always check the label of the product you use.
- Equipment: Medium-pressure washer, cloths
- Protection (PPE): Gloves, goggles, apron, boots
Step by step

- Wash the outside with a water jet.
- Open the outlet valve and drain the remaining raw material.
- Remove the residue inside with a water jet, top to bottom in one direction (use antifoam if needed).
- Residue that won't come off with water: remove it with a cloth and the appropriate solvent.
- Scrub the walls until no product remains.
- Rinse with plenty of water and dry.
- Apply 70% alcohol to the inside walls.
- Cover the tank.
- Fill in the cleaning log tag.
Safety tips and common mistakes
Frequently asked questions
What product should I use to cleaning and sanitizing raw-material tanks?
Water; solvent (ethyl alcohol) if the residue is not water-soluble; 70% alcohol (sanitizing). Reference dilution: As validated. Always check the label of the product you use.
How long should the product sit?
As validated.
What protective equipment (PPE) should I wear?
Gloves, goggles, apron, boots.
What equipment and supplies do I need?
Medium-pressure washer, cloths.
What precautions and common mistakes should I know about?
Follow the plant's validated procedure (in Brazil, ANVISA RDC 48/2013): times, amounts and products are set by validation.
Technical content written by MiLimpa based on professional cleaning methods (Cosmetics industry hygiene and cleaning manual). Initial version, under technical review. Always follow the label and safety data sheet of the product you use.