# Restoring shower glass with a polisher: professional step by step

URL: https://milimpa.com/en/restoring-shower-glass-with-a-polisher-professional-step-by-step/

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Shower glass with medium to heavy mineral scale.

**Quick answer:** To restoring shower glass with a polisher: professional step by step, use glass exfoliating compound (fine abrasive paste); Cerium oxide polishing compound; Neutral detergent; Isopropyl alcohol; main steps: protect the bathroom: a large cloth on the floor inside and outside the shower, electrostatic film on the side walls and wide tape on the top frame or ceiling; wash the glass with neutral detergent, squeegee and wipe with isopropyl alcohol; test a square and show the client; clean the gap between the panels first, by hand, with a pad and compound.

## What you'll need
- Product (by type): Glass exfoliating compound (fine abrasive paste); Cerium oxide polishing compound; Neutral detergent; Isopropyl alcohol
- Reference dilution: Compound and polish ready to use; shake well before use
- Equipment: Rotary polisher with speed control; 3 and 5 inch backing plates; felt pad and cut blue pad; pad brush; brush; spray bottle; electrostatic masking film; wide and thin masking tape; color-coded cloths and microfibers; squeegee; plastic scraper
- Protection (PPE): Safety glasses; gloves; mask; hearing protection

## Step by step
1. Protect the bathroom: a large cloth on the floor inside and outside the shower, electrostatic film on the side walls and wide tape on the top frame or ceiling
2. Wash the glass with neutral detergent, squeegee and wipe with isopropyl alcohol
3. Test a square and show the client
4. Clean the gap between the panels first, by hand, with a pad and compound
5. Divide the glass into sections with thin tape or liquid chalk and start from the top
6. Brush a little compound onto the section and a little onto the pad
7. Run the polisher at its lowest speed, pad flat on the glass, moving horizontally and vertically without stopping in one spot
8. Mist only a little water when the product dries and brush the pad often so it doesn't harden
9. After each section, wash with a sponge and squeegee to check against the light; repeat where stains remain
10. Do the same on the other side of the glass
11. If dull spots remain, finish with cerium oxide polish on the felt pad
12. Wash everything, remove the protection and apply the water repellent

## The balance of this job (Sinner's Circle)
- Chemistry: Medium — exfoliating compound and polish
- Mechanical action: High — rotary polisher at low speed
- Temperature: Medium — friction warms the glass
- Time: High — section-by-section work

## Frequently asked questions
### What product should I use to restoring shower glass with a polisher: professional step by step?
Glass exfoliating compound (fine abrasive paste); Cerium oxide polishing compound; Neutral detergent; Isopropyl alcohol. Reference dilution: Compound and polish ready to use; shake well before use. Always check the label of the product you use.
### How long should the product sit?
Work section by section until the glass looks clean against the light.
### What protective equipment (PPE) should I wear?
Safety glasses; gloves; mask; hearing protection.
### What equipment and supplies do I need?
Rotary polisher with speed control; 3 and 5 inch backing plates; felt pad and cut blue pad; pad brush; brush; spray bottle; electrostatic masking film; wide and thin masking tape; color-coded cloths and microfibers; squeegee; plastic scraper.
### What precautions and common mistakes should I know about?
A dry, product-packed pad hardens and can leave micro-scratches and holograms: brush the pad and use little water. Don't soak felt pads to wash them: the glue comes loose; clean them with a brush. Use one pad per product and different-colored cloths so abrasive never mixes with finishing. The glass warms from friction, but it won't crack from the spray water.
### What if I don't have everything?
No polisher: the same sequence can be done by hand with a blue pad on small areas, with more time. Very thick scale: start with the acid gel remover, then polish.
### How long does it take to restoring shower glass with a polisher: professional step by step?
2 to 4 h per shower.
### When should I call a professional?
Whenever there is no speed-controlled polisher or no experience using one.

_Technical content written by MiLimpa based on professional cleaning methods (Glass and shower restoration video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use._
