# How to wash a food prep area floor

URL: https://milimpa.com/en/how-to-wash-a-food-prep-area-floor/

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Ceramic, porcelain or concrete floor with grout and drains.

**Quick answer:** To wash a food prep area floor, use chlorinated alkaline disinfectant detergent (foam application); Alkaline disinfectant degreaser with quaternary ammonium; Hydrogen-peroxide disinfectant multi-purpose cleaner; main steps: pick up solid waste with the dustpan and take it out of the area; wet the floor with clean water; apply the solution over the whole floor; let it work for 10 minutes.

## What you'll need
- Product (by type): Chlorinated alkaline disinfectant detergent (foam application); Alkaline disinfectant degreaser with quaternary ammonium; Hydrogen-peroxide disinfectant multi-purpose cleaner
- Reference dilution: Chlorinated alkaline disinfectant detergent: pH 12–14; disinfection up to 1:50; degreasing up to 1:100; Alkaline disinfectant degreaser with quaternary ammonium: pH 12–14; light soil 1:100, medium 1:40, disinfection up to 1:20; Hydrogen-peroxide disinfectant multi-purpose cleaner: pH 2.2–3.5; general cleaning up to 1:200; disinfection up to 1:50
- Equipment: Deck brush or holder with general-purpose pad; grout brush; squeegee; dustpan; foam generator or bucket
- Protection (PPE): Waterproof PVC apron; rubber chemical gloves; safety goggles; waterproof safety boots; hair net; uniform

## Step by step
1. Pick up solid waste with the dustpan and take it out of the area
2. Wet the floor with clean water
3. Apply the solution over the whole floor
4. Let it work for 10 minutes
5. Scrub with a brush or general-purpose pad, from the corners toward the center
6. Scrub the grout with a grout brush if needed
7. Squeegee the solution toward the drain
8. Rinse and squeegee the water off until dry

## The balance of this job (Sinner's Circle)
- Chemistry: High — disinfectant degreaser
- Mechanical action: High — deck brush or general-purpose pad on the holder; grout brush
- Temperature: Low — room temperature
- Time: High — 10 minutes

## Frequently asked questions
### What product should I use to wash a food prep area floor?
Chlorinated alkaline disinfectant detergent (foam application); Alkaline disinfectant degreaser with quaternary ammonium; Hydrogen-peroxide disinfectant multi-purpose cleaner. Reference dilution: Chlorinated alkaline disinfectant detergent: pH 12–14; disinfection up to 1:50; degreasing up to 1:100; Alkaline disinfectant degreaser with quaternary ammonium: pH 12–14; light soil 1:100, medium 1:40, disinfection up to 1:20; Hydrogen-peroxide disinfectant multi-purpose cleaner: pH 2.2–3.5; general cleaning up to 1:200; disinfection up to 1:50. Always check the label of the product you use.
### How long should the product sit?
10 minutes.
### What protective equipment (PPE) should I wear?
Waterproof PVC apron; rubber chemical gloves; safety goggles; waterproof safety boots; hair net; uniform.
### What equipment and supplies do I need?
Deck brush or holder with general-purpose pad; grout brush; squeegee; dustpan; foam generator or bucket.
### What precautions and common mistakes should I know about?
Always wash the floor last, after ceiling, walls and counters. Never leave puddles — wet floors cause falls.
### What if I don't have everything?
Dark grout: grout brush instead of a stronger product. Old grease: double the dwell time before scrubbing.
### How long does it take to wash a food prep area floor?
1.5 to 2 min per m².
### When should I call a professional?
Floor with an old grease crust or grout that needs redoing.

_Technical content written by MiLimpa based on professional cleaning methods (Supermarket cleaning video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use._
