# How to scrub floors with a floor machine

URL: https://milimpa.com/en/how-to-scrub-floors-with-a-floor-machine/

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Hard floors, washable floors.

**Quick answer:** To scrub floors with a floor machine, use all-purpose cleaner / degreaser; main steps: fit the brush: bring the flange to the center pin, slot it in, turn left and lock it; set the handle at waist height; to move right, lower the handle slightly; to move left, raise it slightly. Keep the pressure even; remove the dirty water with a squeegee or mop and wringer bucket.

## What you'll need
- Product (by type): All-purpose cleaner / degreaser
- Reference dilution: 1:200 to 1:20
- Equipment: 350 mm floor machine, brush or pad, floor squeegee, wet mop, wringer bucket
- Protection (PPE): Gloves, non-slip shoes

## Step by step
1. Fit the brush: bring the flange to the center pin, slot it in, turn left and lock it
2. Set the handle at waist height
3. To move right, lower the handle slightly; to move left, raise it slightly. Keep the pressure even
4. Remove the dirty water with a squeegee or mop and wringer bucket
5. When finished, engage the safety lock

## Frequently asked questions
### What product should I use to scrub floors with a floor machine?
All-purpose cleaner / degreaser. Reference dilution: 1:200 to 1:20. Always check the label of the product you use.
### How long should the product sit?
—.
### What protective equipment (PPE) should I wear?
Gloves, non-slip shoes.
### What equipment and supplies do I need?
350 mm floor machine, brush or pad, floor squeegee, wet mop, wringer bucket.
### What precautions and common mistakes should I know about?
The safety lock prevents the machine from starting by accident.

_Technical content written by MiLimpa based on professional cleaning methods (Hospitality cleaning manual). Initial version, under technical review. Always follow the label and safety data sheet of the product you use._
