# How to restore a glass bathroom sink with hard-water stains

URL: https://milimpa.com/en/how-to-restore-a-glass-bathroom-sink-with-hard-water-stains/

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Glass and ceramic vessel sinks, including colored ones.

**Quick answer:** To restore a glass bathroom sink with hard-water stains, use glass exfoliating compound (fine abrasive paste); Glass water repellent; Neutral detergent; main steps: wash the sink with neutral detergent and dry it; mask the drain, overflow and all chrome parts with tape; test a corner with the compound and show the client the difference against the light; on thick crusts (where water sits), scrape with the new blade held flat and wet, without using the tip.

## What you'll need
- Product (by type): Glass exfoliating compound (fine abrasive paste); Glass water repellent; Neutral detergent
- Reference dilution: Ready to use; shake the compound first
- Equipment: White and blue pads; scraper with a new blade; colored masking tape; spray bottle; microfibers; flashlight
- Protection (PPE): Gloves; safety glasses

## Step by step
1. Wash the sink with neutral detergent and dry it
2. Mask the drain, overflow and all chrome parts with tape
3. Test a corner with the compound and show the client the difference against the light
4. On thick crusts (where water sits), scrape with the new blade held flat and wet, without using the tip
5. Put a few drops of compound on the pad and scrub in circles, misting only a little water
6. Wipe off with damp microfiber, rinse and check against the light; repeat where stains remain
7. Dry well and apply the water repellent with microfiber across the whole sink
8. Remove the excess and test: water should run off without sitting
9. Tell the client to clean only with neutral detergent and a white pad

## The balance of this job (Sinner's Circle)
- Chemistry: Medium — compound and water repellent
- Mechanical action: High — scraping and scrubbing
- Temperature: Low — room temperature
- Time: Medium — 30 to 60 min per sink

## Frequently asked questions
### What product should I use to restore a glass bathroom sink with hard-water stains?
Glass exfoliating compound (fine abrasive paste); Glass water repellent; Neutral detergent. Reference dilution: Ready to use; shake the compound first. Always check the label of the product you use.
### How long should the product sit?
Scrub until the stain disappears against the light; water-repellent cure as directed.
### What protective equipment (PPE) should I wear?
Gloves; safety glasses.
### What equipment and supplies do I need?
White and blue pads; scraper with a new blade; colored masking tape; spray bottle; microfibers; flashlight.
### What precautions and common mistakes should I know about?
Too much water makes the compound run off and lose its effect: mist lightly. The blade must be new and held flat; the tip scratches. Scouring cleaners used afterwards strip the protection and the stain returns.
### What if I don't have everything?
Very thick crust: scrape first instead of scrubbing for a long time. Ceramic sink: the same process works, with a white pad.
### How long does it take to restore a glass bathroom sink with hard-water stains?
30 to 60 min.
### When should I call a professional?
Old or expensive glass sinks that are hard to replace.

_Technical content written by MiLimpa based on professional cleaning methods (Glass and shower restoration video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use._
