# How to bleach cutting boards and tables (deep clean)

URL: https://milimpa.com/en/how-to-bleach-cutting-boards-and-tables-deep-clean/

A professional step-by-step guide with the right product for the type of soil, the equipment you need and the safety precautions. Works for: Polyethylene cutting boards and tables.

**Quick answer:** To bleach cutting boards and tables (deep clean), use chlorinated alkaline disinfectant detergent (foam application); Chlorinated disinfectant for food-contact surfaces; main steps: if the board is heavily scored, scrape it level; wash the board or table first; apply the chlorine solution over the whole surface; cover with paper or a disposable cloth.

## What you'll need
- Product (by type): Chlorinated alkaline disinfectant detergent (foam application); Chlorinated disinfectant for food-contact surfaces
- Reference dilution: Chlorinated alkaline disinfectant detergent: pH 12–14; disinfection up to 1:50; degreasing up to 1:100; Chlorinated disinfectant for food-contact surfaces: pH 12–14; up to 1:400
- Equipment: Foam generator or container; paper or disposable cloth; board scraper; counter squeegee
- Protection (PPE): Waterproof apron; gloves; safety boots; hair net; uniform

## Step by step
1. If the board is heavily scored, scrape it level
2. Wash the board or table first
3. Apply the chlorine solution over the whole surface
4. Cover with paper or a disposable cloth
5. Wet the paper with the solution again
6. Let it work for at least 2 hours, or overnight
7. Remove the paper and the excess with the squeegee
8. Rinse with clean water
9. Dry with a counter squeegee

## The balance of this job (Sinner's Circle)
- Chemistry: Medium — chlorine at the label dilution
- Mechanical action: Low — the paper cover holds the product in place; scrape only to level
- Temperature: Low — room temperature
- Time: High — at least 2 hours, or overnight

## Frequently asked questions
### What product should I use to bleach cutting boards and tables (deep clean)?
Chlorinated alkaline disinfectant detergent (foam application); Chlorinated disinfectant for food-contact surfaces. Reference dilution: Chlorinated alkaline disinfectant detergent: pH 12–14; disinfection up to 1:50; degreasing up to 1:100; Chlorinated disinfectant for food-contact surfaces: pH 12–14; up to 1:400. Always check the label of the product you use.
### How long should the product sit?
At least 2 hours, or overnight.
### What protective equipment (PPE) should I wear?
Waterproof apron; gloves; safety boots; hair net; uniform.
### What equipment and supplies do I need?
Foam generator or container; paper or disposable cloth; board scraper; counter squeegee.
### What precautions and common mistakes should I know about?
Never use chlorine on wooden boards or together with acids. Always rinse well before cutting food again.
### What if I don't have everything?
Very old stains: give it more time (overnight), never a stronger dose. Deeply grooved boards: scrape them level before bleaching.
### How long does it take to bleach cutting boards and tables (deep clean)?
10 min of work per board + 2 to 12 h of dwell.
### When should I call a professional?
Boards with deep grooves (replace or resurface).

_Technical content written by MiLimpa based on professional cleaning methods (Supermarket cleaning video training). Initial version, under technical review. Always follow the label and safety data sheet of the product you use._
